Motorized Three-Axis Combined Stage XY Translation Z-Axis Lifting Stage
Product description
This XYZ electric three-dimensional combination table is composed of an electric integral combination table PT-XY100 and an electric rotary table PX110-100.
The product does not include the controller, and the controller is ordered separately.
Motorized Integral Combination Stage: PT-XY100
Product features:
※ stepper motor is equipped as standard, which can be automatically controlled by the company's motion controller.
※ the product is small and light in structure, which is suitable for use under light load and low speed, as well as in scientific experiments.
※ high quality fine grinding lead screw drive, small lead, the same fine fraction can achieve high resolution.
※ the ingenious structural design of air elimination check nut can minimize the clearance of grinding lead screw pair.
※ the precision square guide rail is comfortable to move, and has the function of laterally adjusting the guide rail preload and eliminating clearance. It can be used in multi-dimensional combination.
※ the fine grinding of the bottom plate of the electric moving table and the reasonable fixing mode of the guide rail greatly reduce the pitch and yaw of the electric moving table, and greatly improve the straightness and parallelism of the movement.
| Model Number | PT-XY100 |
| Structure | Travel Range(mm) | 100mm |
| Platform(mm) | 300mm x 300mm |
| Screw Guide | 4 |
| Travel Guide | Precise Crossed Roller Bearing |
| Stepper Motor | 42(1.8°) |
| Material | Aluminum Alloy |
| Surface Preparation | Black-Anodized |
| Load Capacity(Kg) | 50 |
| Weight(Kg) | 8.3 |
| Accuracy | Resolution(μm) | 20(Non MS), 2.5(8 MS) |
| Max Velocity | 40mm/sec |
| Repeatability(μm) | 2 |
| Absolute Accuracy(μm) | 3 |
| Straightness(μm) | 5 |
| Moving Parallelism(μm) | 15 |
| Pitching | 50" |
| Yawing | 25" |
| Backlash(μm) | 2 |
| Lost Motion(μm) | 2 |
| Accessory | Installing Grating Ruler (Optional) |
| Reloading Servo Motor (Optional) |
Precision Motorized Rotation Stage (Worm Gear) :PX110-100
Product characteristics :
※ Standard step motor 9 pin interface, the company's motion controller can realize automatic control.
※ Rotating shafting is made of multi-channel precision processing, with high precision, large load bearing and long service life.
※ Precise grinding worm gear structure, comfortable movement, can be arbitrary forward and reverse rotation and small return.
※ Exquisite design of void return structure, can adjust the void return gap caused by long-term use.
※ Special structure design ensures low end jump and eccentricity of rotating table, making rotating movement more stable.
※ The center through hole of the rotary table has strict coaxiality requirements with the rotary center, and the center aperture of the rotary table has strict tolerance limits, which is convenient for customers to make precise positioning.
※ The scale circle outside the table is a laser scale, which can rotate relative to the table to facilitate initial positioning and reading.
※ Stepper motor and worm are connected by high-quality elastic coupling, synchronous transmission, good depolarization performance, reduce eccentric disturbance and low noise.
※ Electric rotating table can be used flat or vertical, and can form multi-dimensional electric adjusting table with other kinds of tables.
※ Optional: add limit function, add initial zero, replace servo motor, add rotary encoder, accept product restructuring and customization.
※ Three-phase stepping motor or servo motor can be replaced to increase the rotation speed and torque.
| Model Number | PX110-100 |
| Structure | Rotation Range | 360° |
| Platform Size | φ100mm |
| Transmission Ratio | 180∶1 90:1 |
| Drive Mechanism | Worm Gear |
| Travel Guide | Bearing |
| Stepper Motor (1.8°) | 42BYG |
| Material Surface | Aluminum Alloy (Black-Anodized) |
| Central Load | 45kg |
| Weight | 1.7kg |
| Accuracy | Design Resolution | 0.01°(Non-MS Driver) |
| 0.0005°=1.8″(20MS Drive) |
| Max Velocity | 25°/sec |
| Repeatability | 0.005°=18″ |
| Absolute Accuracy | 0.01°=36″ |
| End jump accuracy | 15μ |
| Backlash(μm) | 0.005°=18″ |
| Eccentricity | 5μ |
| Lost Motion(μm) | 0.005°=18″ |
| Parallelism | 80μ |
Product Tags:
|
|
Motorized Three Axis Combined Heavy Duty Rotation Stage Xy Translation Z Axis Lifting Images
|
