XYZ Three-Axis Displacement Satge Micro Motorized Linear Stage
Product description:
This motorized three-dimensional displacement stage is composed of three motorized linear stages of the same specification. It has four stroke specifications: 15mm, 30mm, 50mm and 75mm.
Product features:
■ standard 9-pin interface of stepping motor, which can be automatically controlled by the company's motion controller.
■ the product structure is small and light, which is suitable for light load, low-speed use and scientific test.
■ high quality fine grinding screw drive, small lead, the same fraction can achieve high resolution.
■ the ingenious structural design of the air elimination check nut can minimize the clearance of the grinding screw pair.
■ the guide rail adopts cross roller guide rail, which is comfortable to move. It has the function of laterally adjusting the preload of the guide rail and eliminating clearance, and can be used in multi-dimensional combination.
■ the fine grinding of the bottom plate of the electric moving table and the reasonable fixing method of the guide rail reduce the pitch and yaw of the electric moving table, and greatly improve the straightness and parallelism of the motion.
■ the stepping motor and grinding screw are connected through high-quality elastic coupling, with synchronous transmission, good depolarization performance, reduced eccentric disturbance and low noise.
■ equipped with handwheel, convenient for debugging.
■ limit switches are installed at both ends to facilitate accurate positioning and protection of products.
■ the base has threaded holes and through holes with standard hole spacing, which is convenient for installation and fixation.
| Model Number | PP110-15 | PP110-30 | PP110-50 | PP110-75 |
| Structure | Travel | 15 Mm | 30mm | 50 Mm | 75 Mm |
| Platform Size | 65×65mm | 90×90mm | 90×110mm | 90×110mm |
| Screw Specification | Grinding Screw Rod (Lead 1 Mm) |
| Guide | Precision Cross Roller Guide |
| Stepper Motor (1.8 °) | 42Byg |
| Main Material | Aluminium Alloy |
| Surface Treatment | Anodizing Blackening |
| Table Bearing | 5kg | 15kg | 20 Kg |
| Weight | 0.93kg | 1.25kg | 1.4kg | 1.7kg |
| Accuracy | Resolving Power | 5μ/ Pulse (No Subdivision) | 5μ((No Subdivision)
0.25μ(20 Subdivision) |
| Maximum Speed | 5mm/sec | 10mm/sec |
| Repeat Positioning Accuracy | 2μ | 5μ |
| Positioning Accuracy | 10μ | 10μ |
| Straightness | 5μ | 8μ | 12μ |
| Motion Parallelism | 20μ | 15μ |
| Pitch | 30″ | 25″ |
| Yaw | 25″ | 20″ |
| Return Clearance | 2μ | 2μ |
| Lose Step | 2μ | 2μ |
| Accessory | Brake Function (-Z), Grating Scales (-G), Servo Motor (-D) |
Product Dimension Map
PP110-15
PP110-30
Product Tags:
|
|
Aluminium Alloy Motorized Xyz Stage Three Axis Displacement Micro Images
|
